Model Number

JSM 100 TO 600

The pipe gas cutting machine is designed to tackle harsh site conditions ,so is made of all steel construction. Accesibilty to the clamping chain is easy and straight forward also this machine does not need any special design chains, it uses chains which are readily available.

Machine Operation

Select proper?clamping chain as per diameter now slide the machine along with chain on to the pipe, now tighten the nut on top to tighten the chain. Adjust cutting torch to requirement , start gas supply to ignite torch adjust flame length with the height adjustment knob.You are now ready to start cutting of the pipe . So now start rotating the handle given on to the side which starts indexing the machine on the pipe diameter. As the machine rotates along the diameter the torch now cuts the pipe .

You can also do bevelling by adjusting torch angle, bevel degree from 35degree to max 45 degree a engraved degree dial is provided for the same on the machine.

For Stainless Pipe Cutting and Bevelling use Plasma Cutting Tourch and Plasma Cutting Machine

A small angle grinder can also be mounted on the same machine to grind of the gas cut edge

This machine can also be fitted with TIG ,MIG welding touches so as to orbital welding of pipes

Fixed length chains supplied readily with machine for standard pipe diameters.

Machine mounts on Pipe OD and on rotating handle indexes around the pipe simultaneously cutting the pipe.

Min OD 100mm to 600mm OD.

Horizontal movement of the torch is 125mm.

Vertical movement of torch?is 70mm.

Weight of the machine is 13 kgs

Manufactured by

JIN-SHAA MACHINES

83/10 RAHUL APTS LAW COLLEGE ROAD ERANDWANE PUNE 411004 India

?Contact? Sudarshan?J?Patil???cell no +919890272996

Please visit at?http://jinshaa.en.ec21.com/

?/p>